Go to page
 

Bibliographic Metadata

Title
Contact of two equal rigid pulleys with a belt modelled as Cosserat nonlinear elastic rod
AuthorOborin, E.A ; Belyaev, A.K. ; Eliseev, V.V ; Irschik, H.
Published in
Acta Mechanica, 2016, Vol. 228, Issue 12, page 4425-4434
PublishedSpringer Vienna, 2016
LanguageEnglish
Document typeJournal Article
Keywords (EN)74K10 / 74B20 / 74M15
ISSN1619-6937
URNurn:nbn:at:at-ubl:3-1748 Persistent Identifier (URN)
DOI10.1007/s00707-017-1942-0 
Restriction-Information
 The work is publicly available
Files
Contact of two equal rigid pulleys with a belt modelled as Cosserat nonlinear elastic rod [0.8 mb]
Links
Reference
Classification
Abstract (English)

The setting of a looped drive belt on two equal pulleys is considered. The belt is modelled as a Cosserat rod, and a geometrically nonlinear model with account for tension and transverse shear is applied. The pulleys are considered as rigid bodies, and the beltpulley contact is assumed to be frictionless. The problem has two axes of symmetry; therefore, the boundary value problem for the system of ordinary differential equations is formulated and solved for a quarter of the belt. The considered part consists of two segments, which are the free segment without the loading and the contact segment with the full frictionless contact. The introduction of a dimensionless material coordinate at both segments leads to a ninth-order system of ordinary differential equations. The boundary value problem for this system is solved numerically by the shooting method and finite difference method. As a result, the belt shape including the rotation angle, forces, moments, and the contact pressure are determined. The contact pressure increases near the end point of the contact area; however, no concentrated contact force occurs.

Stats
The PDF-Document has been downloaded 2 times.
License
CC-BY-License (4.0)Creative Commons Attribution 4.0 International License